EN 
RADIOMETERS |
ON-LINE MONITORING EQUIPMENT |
|||||||||
| 3DCure® TDS | Manual | Compact Sensor TDS | |||||||||
|
|
3DCure is a unique system for measuring the energy density (J/cm²) and peak irradiance (W/cm²) accurately on large and/or multi-dimensional objects. Up to 32 sensors in any combination of UV bandwidths can be daisy-chained together and placed on every exposure surface in order to feed information back from up to 32 varied measurement points.
|
 |
This small, robust, stable sensor is highly resistant to solarization. Sensors have sealed optics to prevent fouling and an optional air/nitrogen purge to keep the sensor clean and cool. Sensors connect to all of EIT’s online monitoring electronics. A 0-10V and a 4-20 milliamp signal output is generated for each Compact Sensor.
|
|||||||
| PALM Probe® TDS | Manual Not Available | Online UV Intensity Display Module TDS | Manual Not Available | |||||||||
 |
This probe-type, wide dynamic ranged instrument measures peak irradiance (W/cm²) and energy density (J/cm²) in UV curing systems where measurement space is limited or readings can be difficult to obtain with other types of radiometers. Part No. 130036 (UVA) 130018 (UVB) 130104 (UVV) |
 |
Intended for applications requiring a front mount display, this single UV lamp monitor receives an intensity signal from a Compact Sensor and displays the intensity relative to a pre-set 100% intensity (100% representing full output in a bandwidth of interest when the lamp is new). Part No. 130020 |
|||||||
| MicroCure® TDS | Manual | DIN Rail TDS | Manual | |||||||||
 |
Microprocessor-based, battery-powered miniature UV radiometer. Small Size: 1.3"L x 1.0"W x 0.25"T (33.0mm x 25.4mm x 6.4mm). Designed to measure UV dose in web printing, container curing, any tight access UV curing application. Fast sample rate - 2000 per second.
|
 |
This single UV lamp monitor receives an intensity signal from a Compact Sensor. DIN Rail units have no panel display, and rely on shared display capability. The 0-10V analog output is proportional to UV and is designed for PLC or other control system feedback. Part No. 130012 |
|||||||
| Uvicure Plus® II and UV Power Puck® II TDS | Manual | Multibrite® TDS | Manual Not Available | |||||||||
 |
Uvicure Plus II and UV Power Puck II are small, portable, self-contained radiometers that measure UV peak irradiance (Watts/cm²) and energy density (J/cm²) in UV curing applications.
|
 |
Multibrite can monitor up to 4 UV lamps simultaneously and receive an alarm when any lamp drops below a user-settable threshold. The unit displays the output of up to 4 UV lamps in relative intensity from 0-199% (based on what is pre-selected to represent full output when lamps are new). Part No. 130017 |
|||||||
| SpotCure® TDS | Manual | ||||||||||
 |
SpotCure UV Intensity monitor is a hand-held UV radiometer used to measure the output of spot-curing systems to determine light guide degradation. SpotCure's measurement head accommodates light guides of various sizes. The unit displays the peak irradiance in W/cm². Part No. |
|||||||||
| UV PowerMAP® and UV MAP Plus® TDS | Manual | ||||||||||
 |
These profiling and temperature measurement systems travel through a UV system and collect data on peak irradiance (W/cm²) and energy density (J/cm²) as well as temperature. The collected information is viewed with PowerView® software in graphic or tabular format and can be archived for historical purposes.
|
|||||||||
| EIT 3DCure®, EIT Compact Sensor, PALM Probe®, EIT Online UV Intensity Display Module, EIT MicroCure®, EIT DIN Rail, EIT Uvicure Plus® II and EIT UV Power Puck® II, EIT Multibrite® |
||||||||||
